List of Lab Equipment for Rental

Quotation for Lab Instrument / Test Service Charge

The following list of instruments or tests is available for use by the industry. Prices are in Ringgit Malaysia (inclusive of GST).

The location of the instrument / test is as indicated:

  • LKC FES: Lee Kong Chian Faculty of Engineering and Science @ UTAR Sungai Long Campus
  • FSc: Faculty of Science @ UTAR Kampar Campus
  • FEGT: Faculty of Engineering and Green Technology @ UTAR Kampar Campus
  • FMHS: Faculty of Medicine and Health Sciences @ UTAR Sungai Long Campus

Last Updated: 24 October 2023

Name of Instrument / Test LKC FES FSc FEGT FMHS
3D Printer1     1.80 per gram of material used2  
Atomic Absorption Spectroscopy (AAS)   30.00 per element
35.00 (2-4 elements)
40.00 (>4 elements)
   
Attenuated Total Reflection Spectrometer (ATR)   50.00 per sample    
Atomic Force Microscope (AFM)
 

1 sample: 150.00 per sample

>5 samples: 130.00 per sample

   
Bomb Calorimeter     100.00 per sample  
Chamber Furnace     50.00 per run (max 24 hours per run)  
Chamber Tube Furnace 80.00 per run (max 24 hours)      
Compression Strength Test (concrete) 15.00 per run      
Cyclic Voltammetry   100.00 per sample    
Differential Scanning Calorimeter (DSC) System   200.00 per sample 150.00 per sample  
Drying Oven   20.00 per day    
Energy Dispersive X-ray (EDX)   100.00 per sample    
Field Emission Scanning Electron Microscope (FESEM)  

1 sample: 500.00 per sample;

>5 samples: 450.00 per sample;

100.00 per EDX analysis

   
Flexural Strength Test 450.00 per run      
Flow Cytometer       100.00 per tube
Fourier Transform Infrared (FT-IR) Spectroscopy 50.00 per run 50.00 per sample    
Fourier-Transform Infrared Spectrometer (FTIR)   50.00 per sample    

Flame Atomic Adsorption Spectrophotometer (FAAS)

Elements:-

Cd, Co, Cu, Cr, Fe, Pb, Mg, Mn, Ni, K, Ag, Na, Zn

Al, Ca, Sn

As, Hg

 

 

 

40.00 per sample

60.00 per sample

100.00 per sample

   

Freeze Dryer

 

30.00 per use

   
Gas Chromatography – Flame Ionization Detector (GC-FID)   250.00 per sample    
Gas Chromatography Mass Spectrometry (GC-MS)   400.00 per sample    
High Performance Liquid Chromatography (HPLC) 200.00 per run   200.00 per run  
High Volume Air Sampler (PM2.5)     50.00 per sample  
Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) 60.00 per run      
Inductively Coupled Plasma Mass Spectrometry (ICP-MS)     150.00 per sample  
Light-Weight Tensile Tester (Tensile Machine)     150.00 per sample  
Melt Flow Indexer (MFI)     150.00 per sample  
Internal Mixer for polymer     150.00 per sample  

Nuclear Magnetic Resonance (NMR)

1H NMR

13C NMR

COSY

HMQC

HMBC

DEPT

 

 

60.00 per 2 minutes

150.00 per 2 hours

280.00 per 3 hours

280.00 per 3 hours

280.00 per 3 hours

150.00 per 2 hours

   
Particle Size Analyser (PSD analysis)     100.00 per sample  
Permeability Test 50.00 per run      
Powder Packaging Machine   30.00 per day    
Powder Blender
  10.00 per day    
Rheometer 150.00 per run      
Scanning Electron Microscope (SEM) 250.00 per run SEM
100.00 per run EDX
50.00 per run Mapping"
     
Seismic Test (Shaking Table) 7500.00 per run      
Surface Area Analyzer (BET) 450.00 per run      
Swelling Test 200.00 per run      
Simultaneous Thermal Analyser (STA)   200.00 per sample    

Soil Nutrient Analysis

N, P, K

Moisture, TOM, TOC

pH, EC

 

 

65.00 per sample

30.00 per sample

30.00 per sample

   
Temperature Programmed Desorption, Reduction, Oxidation and Pulse Chemisorption (TPDRO) 450.00 per run      
Thermo Gravimetric Analyzer (TGA) 150.00 per run 150.00 per sample    
Total Organic Carbon Analyser (TOC Analyser)     100.00 per sample  
Universal Instron Testing Machine 50.00 per run      
UV/VIS Double Beam Spectroscopy 150.00 per run 15.00 per run
150.00 per hour
150.00 per hour  
Ultra-violet Visible Double Beam Spectrophotometer (UV-Vis)  

20.00 per sample

60.00 per series of sample dilution

   
Vacuum Packaging Machine
 

15.00 per sample

   
X-Ray Diffraction (XRD)  300.00 per run 200.00 per sample    

Note:

  1. Manufacturer: Vagler
    Material: Thermoplastics (PLA, ABS)
    Technology: FDM
    Max building size: 250x200x250 mm (X,Y,Z)
    Min layer height: 50 microns
    Max layer height: 300 microns
    Nozzle diameter: 0.40 mm
    Filament diameter: 1.75 mm
    XY positioning accuracy: up to 11 microns
    File type: STL
  2. Minimum charge is RM35.00
    Price mentioned is for polylactic acid (PLA) material only
    Price mentioned does not include shipping charge
    Price indicated may change without prior notice
    Price mentioned is for basic post processing only
    Special requests on post processing may incur additional charges